OMNI BURNER PARTS
Omni Burner Assembly 120V #H123B34
Omni Burner (All Models, Heaters, Boilers) The Omni waste oil burner is adjustable between 75K – 500K BTU without having to change out parts.
Compressor Motor #10022
1/4 hp compressor/motor. Complete motor and compressor for all Omni models.
Circuit Board (Pre-Heater control) #10017
Pre-Heater control circuit board. Located in the burner box
Oil Primary Control 120V #10001
Oil Primary Control, 120VAC used on all omni models.
Transformer 120V #10018
Burner transformer igniter 120VAC. Comes on the hinged lid for easy replacement.
Solenoid Valve, 120V #10013
Solenoid valve, oil shut off. Located at the burner assembly and fuel pump assembly.
Carbon Plate (compressor) #10025
Air compressor carbon end plate. The inner carbon graphite plate that is removed when accessing the vanes.
Vanes, Air Compressor (4) #10024
Air compressor vane replacement (set of 4) can be purchased individually at $25.00 ea.
Photo Eye w/socket and wire #10282
Photo Eye Cad Cell, Flame sensor w/socket and wires
Photo Eye (Cad Cell Only No wires) SKU# 10028
Photo Eye Cad Cell. Flame Sensor Lens. Lens only
Run Light (Amber) #10287
Run Light (Amber) located on the front of the burner
Indicator Light (Green) #10288
Indicator Light (Green) located on the front of the burner
Air Filter Canister w/filter (New Style) #10560
The newer style air filter canister with filter included. Will replace the old style filter located in the burner box or the even older muffler style filter.
Air Filter (New Style) #10561
Air filter replacement for air filter canister models. If replacing the old style filter located in the burner box you need to purchase the housing for this filter.
Elbow Push Lock, Fitting, Air/Oil #10525
Elbow push lock fitting. Used for both the air and oil lines located at the burner.
Straight Push Lock, Fitting, Air/Oil #10524
Straight push lock fitting. Used for both air and oil lines at the burner.
Fitting, Compressor Air Adjustment #10522
Air adjustment bleeder screw. Regulates the burner air pressure.
Hose, Clear (Oil & Air) #10526
Clear poly hose used for both air and oil lines at the burner. Sold by the foot.
Flame Cone W/Ring #10362
Flame Cone W/Ring. Located in the flame of the burner where the nozzle is replaced.
Squirrel Cage, Burner Blower #10027
Squirrel cage, burner blower wheel
Flange Gasket Burner Door (flat/white) #10164
Flange gasket for the burner door.
Pressure Gauge, Square Face 30psi #10284
Air pressure gauge. 30 psi square face gauge.
OMNI PRE-HEATER BLOCK PARTS
Pre-Heater Block W/Parts #H123PB13
Pre-Heater block with all pre-heater block parts installed.
Pre-Heater Block (Block Only) #10045
Pre-Heater Block (block only) comes as a blank block. Also sold with all parts
Nozzle #10042
Nozzle, All Omni Models.
Electrode Set #10043
Electrode Set (All Omni Burners) comes as a set of (2)
Thermocouple #10046
Thermocouple, 12″
Heat Rod 120V #10049
Heater Element 120VAC,500W (HeatRod) 8x 1/2 inch diameter
Elbow Push Lock, Fitting, Air/Oil #10525
Elbow push lock fitting. Used for both the air and oil lines located at the burner.
Straight Push Lock, Fitting, Air/Oil #10524
Straight push lock fitting. Used for both air and oil lines at the burner.
Snap Switch (New Style) #10095
High Limit Snap Switch 185° For newer models that have 2 screws holing it place on the block v’s the older studded style switch.
Snap Switch (Studded) #10047
High Limit Snap (175°) Screw in style studded. This is for older model pre-heater blocks. The newer models have 2 small screws that hold it in place v’s the stud.
OMNI PRE-HEATER BLOCK PARTS
Oil Pump Assembly, 120V #H123OP06
Oil pump assembly for all Omni models. Includes all pump parts, assembled and ready for an easy replacement. Please specify the size of heater or boiler when ordering as they ship from the factory pre-set.
Pancake Filter Assembly (Housing & Mesh Screen) #10058
Pancake filter assembly with mesh screen. All older models came standard with this style of filter.
Pancake Filter Element #10059
Pancake filter screen replacement.
Solenoid Valve, 120V #10013
Solenoid valve, oil shut off. Located at the burner assembly and fuel pump assembly.
Oil Pump, Suntec 7710 #10496
Suntec Fuel Pump (Use with MM Motors) #7710
Oil Pump Suntec 7736 #10495
Suntec Pump 7736 (Omni Pressure System and older bison motors)
Pump, Suntec gasket, strainer kit #10507
Gasket and strainer replacement for Suntec pumps 7710 / 7736
1 amp breaker, pump
1 AMP Circuit Breaker located at the fuel pump assembly.
OMNI CABINET & CHAMBER PARTS
Fan Motor 150/350 #10077
Fan Motor for OWH-150, OWH-350
Fan Motor 250/500 #10076
Fan Motor For OWH-250 & OWH-500 1/3 HP
Fan Control, High Limit #10084
High limit fan control for all omni heaters
Gasket, Rope 3/4″ (Swing Doors) #10479
Rope gasket 3/4″ round for burner and clean out doors.